FOR MICROBIAL TREATMENT OF SEWAGE PIPES, FAT SEPARATORS AND FILTERS OF EXHAUST HOODS  

SMELLEX® BIOCLEAN

reduces grease, short- and long-chain aliphatic acids, proteins, lipids and carbohydrates and decreases the formation of bad odors in consequence of anaerobic biological procresses of degradation like hydrogen sulfide and volatile rancidly seeming aliphatic acids. SMELLEX® BIOCLEAN reduces conspicuous greases and deposits. Pipes, filters of exhaust hoods and separators will not be damaged by this environmentally friendy formulation.

SMELLEX® BIOCLEAN is ready to use and can be applied manually or applying an automatic dosage-system. Temperature range for application: 5 – 45 °C

APPLICATION

Apply Smellex® Bioclean undiluted into the systems, which should be cleaned.

FOR APPLICATION

• Fat separators:

– the first application 1.5 l/m3 (volume of fat separator)

• Regular application:

– in case of 400-500 meals per day approx. 0.4 l per day

– in case of 2000 meals per day approx. 1.5 l per day

• Drain pipes:

– the first application approx. 0.4 l per week

– regular application approx. 0.1 l per week

• Filters of exhaust hoods:

– at first application: remove rugh dirt, spray and reinstall the filter. Afterwards rinse with warm water 14- day

– regular application: spray on filter every evening while the exhaust hood is running

ATTENTION:

SMELLEX® BIOCLEAN should not be applied in case of temperatures under 5 °C und in case of direct sunlight, because otherwise the efficiency of the microorganisms could not be guaranteed any more.

Please store frost-free and protected against light.

TECHNICAL DATA

Consistency: cream-colored, odor-free liquid

Density (20 °C): 1.06 g/cm³

pH-value (conc. 20 °C): 8.0 – 9.0

Flash point: unapplicable

Effective pH-range: 4.5 – 8.5

Item-No. 0795

INGREDIENTS

tensides, non pathogene microorganisms Storability: at least 6 months in case of storage from +5 up to +30 °C